EXHIBITION BRACKETS
The B Tech exhibition stand mounting system has been designed to fit slotted modular exhibition stands. The Exhibition mounting system works with 2 main components
- a horizontal interface bracket (24XH) and a vertical interface bracket (24XV). These interface brackets will slot into exhibition stands that feature profiles with slots between 4.3mm and 8.5mm. Once the interface bracket has been attached it is then possible to connect a B Tech audio visual mount to the interface bracket. AV Equipment may then be mounted to the slotted display stand allowing AV equipment to be intergrated into an exhibition stand.
The B Tech interface brackets expand to fit into a profile using 4 allen bolts. The bracket can be slid up or down a profile or attached mid profile for ease of installation.
The exhibition interface bracket features 5 threaded holes which will allow easy connection to a wide range of B Tech modular AV mounts (the same mounts that fit accessory collars).
The exhibition mounting range has been tested on Octanorm modular slotted exhibition stands and many other leading stand manufacturers'systems.The exhibitrion stand mounting range has been designed to support AV equipment mounted horizontally up to 10kgs and 20 kgs per bracket when mounted vertically.
24XH HORIZONTAL EXHIBITION MOUNT
Designed for mounting on horizontal poles. 5 Threaded fixing centres for easy attachment to screen mount.
Adjusts to fit slots from 4.3mm to 8.5mm Maximum Load 10kgs. $ 113.95 GST Included.
24XV VERTICAL EXHIBITION MOUNT
Designed for mounting on vertical poles. 5 Threaded fixing centres for easy attachment to screen mount.
Adjusts to fit slots from 4.3mm to 8.5mm. Maximum Load 20kgs. $ 113.95 GST Included.
25X SINGLE POINT ADAPTOR
Single point threaded mount . Ideal for CCTV cameras, camcorders, single mounting point speakers.
and as a general purpose mount 360º Swivel and 90º Tilt. Supplied with dual point adaptor plate for general purpose mounting.
Maximum Load 10kgs. $ 71.95 GST Included.
26X LARGE FLAT PANEL MOUNT
Back plate designed to attach to 24XV, only for the mounting of large flat panel screens. Must be used with screen interface kit 8500, 8600 or 7507
(see below). Must be used with 2 x 24XV for secure mounting of larger screens. When mounting the 26X with 2 x 24XV it is possible to mount
up to 40Kg. The exact weights permissible do however depend on the design & layout of the stand & all weight limits are intended as a guide of
the maximum weight only. Large Flat Panel Brackets (For stability use with 24XV only) with 8500, 8600 or 7507.
Maximum Load 40kgs. $ 132.95 GST Included.
Image Brackets
SCROLL DOWN TO VIEW PRODUCTS
Copyright 2007 Image Brackets All Rights Reserved
